opc_loader
RE TI-8

RE TI-8

Rigexpert

RigExpert TI-8 USB-Interface (zonder Rig-kabel)

(Prijs excl. btw) 164,46
220,00 199,00 U bespaart: 10%
x
Verzendmethode
B-POST / GLS BE (3 tot 5 dagen):
9,08
Levertijd:
3 tot 5 dagen

RigExpert TI-8 – Specifications

General features:
  • Transceiver audio interface for operating digital modes, voice recording and playback
  • CAT (Computer Aided Transceiver) system
  • FSK output
  • PTT and CW outputs
  • CW keyer (WinKey)
  • Squelch input
Computer connection:
  • USB (Universal Serial Bus) connector
  • Powered from the USB port (consuming 100 mA maximum)
  • No external power supply needed
Transceiver connection:
  • Single 25-pin connector for transceiver cable
  • Various transceiver models supported
Audio interface:
  • Insulated from digital nets
  • Maximum input/output amplitude is 1V
  • Input/output samplerate: 8 to 48 kHz
  • True 16-bit DAC/ADC used
  • Volume levels are adjusted by the front panel potentiometers
CAT serial port:
  • Baudrate: 300-115200 baud
  • Electrical compatibility: RS-232, CI-V, TTL or inverted-TTL (Yaesu, Icom, Kenwood, Ten-Tec, Elecraft and JRC transceivers)
PTT/CW outputs:
  • PTT output: open collector and TTL-level
  • CW output: open collector
  • Maximum current is 50 mA
FSK output:
  • Baudrate: 45-1200 baud
  • Open collector output
System requirements:
  • Desktop or laptop computer with USB 1/2/3 compliant port
  • Windows 2000/XP/2003/Vista/7/8/10 (32- or 64-bit) operating system
  • No USB drivers required
  • The RigExpert TI Manager software is provided free of charge

Dimensions: 11 x 13 x 4 cm

Weight: 0.3 kg

Operating temperature: 0…40 °C

Warranty: 2 years

RigExpert TI-8 – Front and rear panels

panels1

Front panel:
1.    ON.  Lights when the RigExpert TI-8 device is plugged in and the drivers are installed.
2.    CW. Shows transmissions in CW mode.
3.    PTT. Indicates when the transceiver transmits.
4.    CAT. Monitors CAT data exchange between transceiver and computer.
5.    FSK. Lights when RigExpert TI-8 is sending FSK data.
6.    Main. Input level, main receiver audio.
7.    Sub.  Input level, sub-receiver audio.
8.    TX. Output level, audio to the transceiver.

Rear panel:
9.     TRANSCEIVER. 25-pin transceiver connector.
10.     USB. Connect to the computer USB port.

RE TI-8 heeft nog geen reviews. Deel uw product ervaring en plaats een review.

Alternatieve artikelen:

Retourgarantie

Retourneren binnen 7 dagen na ontvangst van uw artikelen.

Levering

verzending : 1-3 werkdagen na betaling en indien op voorraad

Nieuwe Artikelen
145,00
4.950,00 4.444,00
Laatst bekeken items
220,00 199,00